Camera Accessory

UNX-8541

This is a lens rear cap for Micro Four Thirds. It is also compatible with special Micro Four Thirds lenses for industrial use, etc., which were not compatible with the conventional UNX-8512. The lens cap is made of resin but is solidly built to protect your precious lens from dust and dirt.

Lens cap

UNX-8510/UNX-8511/UNX-8512

Resin body cap and lens rear cap for Micro Four Thirds cameras. Although they are made of resin, they are solidly made and will protect your precious camera and lens from dust and dirt. Recommended as spare caps!

Lens cap

UNP-5537/UNP-5541

The flexible material acts as a cushion to protect the lens from impact. Another feature is that it is difficult to remove.

Lens cap

UNX-9501～UNX-9542

The cap is mounted in the center of the cap, so it can be easily attached and removed even when a lens hood is attached. (27mm/28mm/30mm/34mm are both side type.) It also comes with an anti-drop cord to prevent loss of the cap. The lens cap is available in 19 different sizes from 27mm to 105mm to suit your lens.

Lens cap

UNX-8119

This is a plastic front cap for the UNX-8133-UNX-8135/UNX-8117/UNX-8118 square hoods. It can also be used with the genuine Leica square hood 12501 (Leica M Super Angulon 21mm f/3.4/Elmarit 28mm f/2.8).

Lens Hood

UNX-8521

49mm Ring (Female/Female) for FUJI FinePix X100/X100sBy detaching the lens front ring of FUJI FinePix X100/X100s/X100T/X...

Lens Hood

UNX-8637/UNX-8638

Metal square hood for Fuji X100 series. It consists of two parts, the hood ring (with O-ring) and the hood body. The O-ring acts as a rotation stopper to allow the hood to be set and attached in a parallel position. .The high-grade finish of the aluminum construction gives the hood a sense of unity with the camera even after installation.

Lens Hood

UNX-8133～UNX-8135 /UNX-8117/UNX-8118

Square Lens Hood with a CapThis is a high-grade square hood that is used by attaching a special aluminum ring (39mm/43mm...

Lens Hood

UNX-5370～UNX-5378

A metal wide angle hood made from a single piece of ground aluminum for 24㎜ wide angle lens. The hood has filter thread on the tip to attach a lens cap etc. The inner matte coating is carefully finished by Japanese craftsmen one by one.

Lens Hood

UNX-5361～UNX-5368

A black metal lens hood made of solid ground aluminum for a standard 50mm lens. The hood has filter thread on the tip to attach a lens cap or filter. The inner matte coating is carefully finished by Japanese craftsmen one by one.

Lens Hood